How to Calculate Cost of Ownership of a Timber-Look Composite Deck

composite NewTechWood decking, outdoor room

 

How much composite decking costs? When homeowners start researching timber decking alternatives, that question is first on the list.

Today’s trend is to create an outdoor space or ‘room’ that provides more quality living space for the family.  It allows you to enjoy the outdoors and it’s cheaper than building on an extra room.  Whether this is an extravagant outdoor space with kitchen and fans, or a simpler set up with just a BBQ, one of the major expenses in common with both is the flooring.

Due to the expense and time required for natural timber maintenance, interest has grown in composite decking options, such as NewTechWood.

NewTechWood is a timber-look composite manufactured from 60% recycled timber and 40% recycled plastic.  It’s not only environmentally friendly, but it requires little to no maintenance compared to natural timber and comes with a 25-year warranty.

Decks can be built from less expensive treated pine to heavier, more expensive natural timbers, but they all require ongoing maintenance for the rest of their lives. Yes, natural timber decking is lighter and more inexpensive. But, certain timbers may be infused with harsh chemicals to prevent mould, mildew and other problems common to timber. These chemicals often create a greenish tint to the boards that may take many summers to fade and can be poisonous to pets.

Upfront Savings Don’t Equal Cheaper Decks

However, when the budget is the number one priority, most homeowners turn to cheaper timber, like treated pine, because this wood is low cost – at least initially. The more upmarket timbers, such as Jarrah and spotted gum are not only pricier and still require ongoing maintenance, but they deplete our natural resources. Because they are natural wood, they will also eventually surface check (crack), warp, cup, or splinter, even with the best of care.

There are more reasons people are turning to wood-look composites, but as with timbers, even composites are not created ‘equal’.  Cheaper composites are cheaper for a reason, and you get what you pay for. The less expensive composites not only look and feel like plastic, but they also do not last.  Tip: Check the product warranty.

Higher-quality wood composite, like the product offered by NewTechWood, is fabricated using high-density recycled plastics and wood fibres – materials that typically end up in our landfills – to create boards that look like real wood and feel like the real deal underfoot.

This quality-made composite timber decking is manufactured to be eco-friendly and create a durable, natural look with a lower total cost of ownership than natural timber decks. Yes, you read that right. And I know what you’re thinking. “But I’ve checked it out, and timber is so much cheaper!”

Calculating the True Total Cost of Ownership (TCO)

 When choosing construction materials for your new outdoor space, don’t simply consider the initial costs of materials and construction. You’re going to own that deck for a long time and you want it to last without a lot of time and money-consuming maintenance.

For example, natural timber will require the application of a wood sealant or oil regularly – every six to twelve months depending on climate, exposure to the elements, and the amount of use it gets. The weather, the sun, the family activities – all of these take their toll on your outdoor living space. This results in the necessity of ongoing routine maintenance and potential for expensive repairs. Re-stain it. Reseal it. Power wash it each spring to remove mildew and mould. Replace worn decking weakened over time.  Your “cheaper” natural timber deck needs constant upkeep.

You can pay someone to seal your deck each season and you’ll add to the TCO every time the maintenance crew shows up. Time to write another cheque.  Of course, you can do it yourself, but you’ll spend much of your free time (as well as money) applying the chemicals to the decking while trying to keep the kids and the family dog away.

So, when calculating the total cost of ownership, start with initial costs for materials, and add the construction labour cost. Then add the cost of stains, sealants, and routine deck maintenance. Calculate the value of your time if you spend a Saturday sealing the deck instead of snoozing on the deck!

Calculate Lifetime Decking Costs

composite decking, spend family time rather than time on maintenance

When calculating TCO, run your numbers out at least 10 to 20 years. How much will the TCO be for your deck then, when you add up annual maintenance costs, the hours of painting, staining, sealing, and scrubbing off mould, not to mention the rising cost of the products you need to use?  Don’t just consider the initial cost. Determine the total cost of ownership over the expected life of your deck.

In a nutshell, with natural timber over the next 20+ years, you will be spending a lot of time and money on ongoing maintenance… but with a composite like NewTechWood, the only thing you’ll be spending time and money on is throwing another shrimp on the barbie and once in a while washing down your deck with a hose and a broom.

What sounds better to you?

Find out more about NewTechWood and where to buy composite NewTechWood from trusted suppliers around Australia.

Frequently Asked Questions

Does a NewTechWood composite deck cost more than a timber deck?

In the short term, it does. However, when you compare the maintenance, material, time and labour cost on traditional timber decks every year the costs really add up. In less than three years, you will be able to see all the time and money you would have saved by using NewTechWood composite timber.

We are the wholesale importers and thus we only supply the stores that sell NewTechWood and are unable to provide pricing because we don’t sell direct to the public. You can find the stores who do sell NewTechWood on our website here: or you can submit an enquiry through our website, and we will make sure to connect you with the nearest NewTechWood reseller to get an exact quote for you.

NewTechWood is an American family-owned company, which began in Houston, Texas. They then built their own, quality controlled, manufacturing plant in China. The American owners now manage the complete manufacturing process on site. (Manufacturing in China enables them to provide top quality products at an affordable price.)

What state are you in? Please send us your postcode and we will advise the closest reseller store to go, see display, get free samples and quote for your deck. Otherwise, you can find where the stores are listed on our Store Locator page. They all carry samples as well. Some have large displays, and some do not – you can give them a call.

We’re wholesalers and we don’t do the installation. However, we have a list of recommended installers on our website and you can find comprehensive Installation Guides on our website.

Whether or not any building product meets an Australian building standard depends on the application and the class of building on which it is being installed. For this reason, it is best to consult your architect, or Planning Officer at your local authority, for the particular standard(s) you need to meet. This will determine how it is to be constructed/used to ensure it meets the required Standard(s).

BAL Fire ratings and energy efficiency ratings are not absolute values specific to a particular product, but apply to the way in which the product is installed, or the system of building in which the product is an element.  

NewTechWood Cladding does not have a BAL bushfire rating. Refer to your building engineer as you may not require a BAL rating, and may be able to be used with an engineered, fire-rated system in place. Refer to the Materials Safety Data Sheet downloadable here:

https://newtechwood.com.au/technical-information/

NewTechWood, like all wood plastic composite products, will expand in hotter ambient temperatures and contract in the cooler temperatures. The degree of expansion will largely depend on the type and ratio of timber & plastics used.

NewTechWood profiles will expand around 1.1mm per metre from a 15°C to high ambients.

Our hidden fix systems allow for this natural expansion & contraction to occur without affecting board creep or the design of the deck.

When installed properly, taking into account the ambient temperature at the time of installation and leaving a sufficient but not excessive gap, the spacings between the boards should always be negligible.

Get Inspired

Are You Ready To Start Your Project?

NewTechWood Cladding is Now CodeMark® Certified to NCC 2022 (A1)

The supplier will respond to your NewTechWood installation enquiry within 24 hours.

However, if you do not hear back please email us, so we can help further.

Name
What product/s are you interested in?
Drag & Drop Files, Choose Files to Upload